Sab hauv thiab sab nrauv phab ntsa Putty

Polymer single-component dry powder coarse putty, featuring high adhesive strength, low water absorption, and excellent crack resistance. It is ideal for the first and second coat applications for wall leveling.

● The putty film has excellent elasticity and dynamic crack resistance.

● Low water absorption with good water and alkali resistance.

● Good impact resistance, with high mechanical strength over time.

● High adhesive strength, resistant to blistering and peeling.

● Stable performance, with resistance to temperature fluctuations and extreme cold and heat.

Cov Kev Cai Huab Cua: Avoid application in harsh weather conditions such as frost, freezing, rain, or snow. The base temperature should be between 5-35℃, and the air humidity should be less than 85%.

Mixing Ratio: Mix components in a ratio of ""A:B = 2.5:1"" using mechanical stirring until uniform, ensuring there are no lumps, large particles, or excessive viscosity. Use immediately after mixing and avoid prolonged standing.

Daim Ntawv Qhia Cov Lus Qhia: Apply the prepared coarse putty with a putty knife, filling in 1-2 coats. Before it dries, use a scraper to level the surface and make it smooth.

Curing Instructions: After the putty is applied, water-cure for 7-14 days to allow sufficient reaction of inorganic silicates in the putty, ensuring that the required properties are achieved.

Cov Lus Qhia Cia: As a water-based putty, it is a non-hazardous product for transport. Store in a cool, ventilated place at temperatures between 5-35℃, away from direct sunlight and rain. The sealed storage period is one year.